The world of incident management is foggy at best. There are rules, sometimes. There is some valuable training, but it doesn’t necessarily apply to all circumstances or environments. There are national models, a few of them in fact, which makes them models, not standards. Incident management is not as straight forward as some may think. Sure, on Type 4 and 5 incidents the management of the incident is largely taking place from an incident command post. As you add more complexity, however, you add more layers of incident management. Perhaps multiple command posts (a practical truth, regardless of the ‘book answer’), departmental operations centers, emergency operations centers at various levels of government, and an entire alphabet soup of federal operations centers at the regional and national levels with varying (and sometimes overlapping) focus. Add in operational facilities, such as shelters, warehouses, isolation and quarantine facilities, etc. and you have even more complexity. Trying to map out these incident management entities and their relationships is likely more akin to a tangle of yarn than an orderly spiderweb.
Incident Management Teams (IMTs) (of various fashion) are great resources to support the management of incidents, but I often see people confusing the application of an IMT. Most IMTs are adaptable, with well experienced personnel who can pretty much fit into any assignment and make it work. That said, IMTs are (generally) trained in the application of the incident command system (ICS). That is, they are trained in the management of complex, field-level, tactical operations. They (usually) aren’t specifically trained in managing an EOC or other type of operations center. While the principles of ICS can be applied to practically any aspect of incident management, even if ICS isn’t applied in the purest sense, it might not be the system established in a given operations center (in whatever form it may take). While IMTs can work in operations centers, operations centers don’t necessarily need an IMT, and while (formal) IMTs are great resources, they might not be the best solution.
The issue here certainly isn’t with IMTs, though. Rather it’s with the varying nature of operations centers themselves. IMTs are largely a defined resource. Trying to fit them to your EOC may be a square peg/round hole situation. It’s important to note that there exists no single standard for the organization and management of an EOC. NIMS provides us with some optional models, and in practice much of what I’ve seen often has some similarity to those models, yet have deviations which largely prevent us from labeling what is in practice with any of the NIMS-defined models in the purist sense. The models utilized in EOCs are often practical reflections of the political, bureaucratic, and administrative realities of their host agencies and jurisdictions. They each have internal and external needs that drive how the operations center is organized and implemented. Can these needs be ultimately addressed if a single standard were required? Sure, but when governments, agencies, and organizations have well established systems and organizations, we’ll use finance as an example, it simply doesn’t make sense to reorganize. This is why we are so challenged with establishing a single standard or even adhering to a few models.
The first pathway to success for your operations center is to actually document your organization and processes. It seems simple, yet most EOCs don’t have a documented plan or operating guideline. It’s also not necessarily easy to document how the EOC will work if you haven’t or rarely have activated it at all. This is why we stick to the CPG-101 planning process, engaging a team of people to help determine what will or won’t work, examining each aspect from a different perspective. I also suggest enlisting the help of someone who has a good measure of experience with a variety of EOCs. This may be someone from a neighboring jurisdiction, state emergency management, or a consultant. Either way, start with the existing NIMS models and figure out what will work for you, with modifications as needed. Once you have a plan, you have a standard from which to work.
Once you have that plan, train people in the plan. Figure out who in your agency, organization, or jurisdiction has the knowledge, skills, and abilities to function within key positions. FEMA’s EOC Skillsets can help with this – even if the positions they use don’t totally map to yours, it’s not difficult to line up most of the common functions. Regardless of what model you are using, a foundation of ICS training is usually helpful, but DON’T STOP HERE. ICS training alone, even if your EOC is ICS-based, isn’t enough. I can practically guarantee your EOC uses systems, processes, or implementations unique to your EOC which aren’t part of ICS or the ICS training your personnel received. Plus, well… if you haven’t heard… ICS training sucks. It can be a hard truth for a lot of entities, but to prepare your personnel the best way possible, you will need to develop your own EOC training. And of course to complete the ‘preparedness trifecta’ you should then conduct exercises to validate your plans and support familiarity.
All that said, you may require help for a very large, long, and/or complex incident. This is where government entities and even some in the private sector request incident management support. Typically this incident management support comes from established IMTs or a collection of individuals providing the support you need. The tricky part is that they aren’t familiar with how you are organized or your way of doing things. There are a few ways to hedge against the obstacles this potentially poses. First, you can establish an agreement or contract with people or an organization that know your system. If this isn’t possible, you can at least (if you’ve followed the guidance above) send your plan to those coming to support your needs, allowing them at least a bit of time in transit to study up. Lastly, a deliberate transition, affording some overlap or shadowing time with the outgoing and incoming personnel will help tremendously, affording the incoming personnel to get a hands-on feel for things (I recommend this last one even if the incoming personnel are familiar with your model as it will give an opportunity to become familiar with how you are managing the incident). Of course all of these options will include formal briefings, sharing of documentation, etc.
Remember, though, that there are certain things your agency, organization, or jurisdiction will always own, especially the ultimate responsibility for your mission. Certain internal processes, such as purchasing, are still best handled by your own people. If your operations are technical and industry-specific, such as for a utility, they should still be managed by your own people. That doesn’t mean, however that your people can’t be supported by outside personnel (Ref my concept of an Incident Support Quick Response Team). The bottom line here is that IMTs or any other external incident support personnel are great resources, but don’t set them up for a slow start, or even failure, by not addressing your own preparedness needs for your EOC. In fact any external personnel supporting your EOC should be provided with a packet of information, including your EOC plan and procedures, your emergency operations plan (EOP), maps, a listing of capabilities, demographics, hazards, org charts for critical day-to-day operations, an internal map of the building they will be working in, and anything else that will help orient them to your jurisdiction and organization – and the earlier you can get it to them the better! Don’t forget to get your security personnel on board (building access cards and parking tags) and your IT personnel (access to your network, printers, and certain software platforms). Gather these packets beforehand or, at the very least, assemble a checklist to help your personnel quickly gather and address what’s needed.
© 2021 Tim Riecker, CEDP
The Contrarian Emergency Manager 